HP 2490 User Manual

Page 3

PDA Wireless Patch Instructions - Windows Mobility 5.0

Steps

Screen Displayed

Procedures

PDA OUT OF CRADLE

STEP #2: Performing a HARD reset on
the PDA and Initial Setup after reset.

• Remove the PDA from the cradle

• Hold down the Power, Message,

and Calendar buttons at the same
time.

• While holding down the three

buttons, Press the Stylus Pen into
the small hole on the bottom left
side and Hold until you see the
screen go black,

• Release the buttons and remove

the stylus

Note: After screen begins to rest, you
should see a message at the bottom of the
screen: “Formatting PS……”. If
message does not appear, retry the Hard
Reset procedure again.

Performing initial setup items.

Before putting the PDA back into the
cradle, the initial setup must be
completed.

• Follow the onscreen prompts

• When completed, place the PDA

in the Cradle

PDA IN CRADLE

Welcome Screen Appears.

• Click Next button

• Uncheck Synchronize box

• Click Next button

Created by Polk County Schools

Help Desk 519-8042 or 51586

Updated: 07/24/08