HP RM-20 - Manual (Page 11)

SmartShare
®
User Manual
– 10 –
External Servers (optional)
NTP Server
If the system time must be synchronized with an external NTP server, its host name or
IP address can be set.
The default configuration is: (empty)
LAN (Local Area Network) configuration menu
Network Setup
The router name must be set. Optionally a domain name can be configured. This
information is used by the built-in DHCP server (if enabled) to configure clients on
the LAN using DHCP for automatic IP configuration.
The default router name is: router
The default domain name is: local
IP Address Range
The IP address range must be set. This information is used to distribute the bandwidth
among the active users and by the built-in DHCP server (if enabled) to configure
clients on the LAN using DHCP for automatic IP configuration.
The default IP address range is: 192.168.2.1-192.168.2.255
Local DNS Servers (optional)
If there are any DNS servers on the LAN, their IP addresses can be set. This
information (in addition to the DNS server information from the WAN) is used by the
built-in DHCP server (if enabled) to configure clients on the LAN using DHCP for
automatic IP configuration.
The default configuration is: (empty)
Local NTP Server (optional)
If there is an NTP server on the LAN, its IP address can be set. This information is
used by the built-in DHCP server (if enabled) to configure clients on the LAN using
DHCP for automatic IP configuration.
The default configuration is: (empty)
Built-in DHCP Server
If enabled, the built-in DHCP server automatically configures clients on the LAN
using DHCP for automatic IP configuration.
The default configuration is: Enabled