Huawei ADSL2+Broadband Router Aolynk DR814 - Manual (Page 17)

User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router 3 Getting Started with
the Web Pages
14
3.5 Default Device Settings
In addition to handling the DSL connection to your ISP, the ADSL router can provide a
variety of services to your network. The device is pre-configured with default settings
for use with a typical home or small office network.
The table below lists some of the most important default settings; these and other
features are described fully in the subsequent chapters. If you are familiar with network
configuration, review these settings to verify that they meet the needs of your network.
Follow the instructions to change them if necessary. If you are unfamiliar with these
settings, try using the device without modification, or contact your ISP for assistance.
We strongly recommend that you contact your ISP prior to changing the default
configuration.
Table 3-3 Default settings
Option Default Setting Explanation/Instruction
DSL Port IP
Address Unnumbered
interface:
0.0.0.0
Subnet mask:
0.0.0.0
This is the temporary public IP address of the
WAN port on the device. It is an unnumbered
interface that is replaced as soon as your ISP
assigns a
‘real’ IP address. Refer to 7 Service
Configuration.
LAN Port IP
Address Assigned static IP
address:
192.168.1.1
Subnet mask:
255.255.255.0
This is the IP address of the LAN port on the
device. The LAN port connects the device to
your Ethernet network. Typically, you will not
need to change this address. Refer to 6 IP
Addresses, Network Masks, and Subnets.
DHCP
(Dynamic
Host
Configuratio
n Protocol) DHCP server
enabled with the
following pool of
addresses:
192.168.1.2
to192.168.1.21
The ADSL router maintains a pool of private IP
addresses for dynamic assignment to your
LAN computers. To use this service, you must
have set up your computers to accept IP
information dynamically, as described in 5.1
Configuring Ethernet PCs.
NAT
(Network
Address
Translation) NAT enabled Your computers ’ private IP addresses (refer to
DHCP above) will be translated to your public
IP address whenever they access the Internet.
Refer to 4.7 Security Interface.
DSL mode MultiMode Can be configured to multiple standard DSL
line modes.
Default
Username:P
assword
admin:admin
Use this account to login web-based setup
pages.