Honeywell MS-9200UDLSE - Manual (Page 200)

NFPA Standard-Specific Requirements
200 MS-9200UDLS PN 52750:E1 01/27/09
NFPA 72 Remote Station Protective Signaling System
Notes:
1. Cut Jumper JP3 on the MS-9200UDLS main circuit board to supervise placement
of the 4XTMF module.
2. Refer to "4XTMF Transmitter Module Installation" on page 56 for detailed
information.
RS82 Remote Station Receiver UL listed.
Refer to Instruction Manual for Remote Station Receiver
Model RS82.
+ -
Polarity Shown is
Normal Standby
4XTMF Transmitter Module Cutting TBL Jumper allows the
reverse polarity circuit to open
with a system trouble condition
if no alarm condition exists.
Power-limited
Figure C.2 Remote Station Connection Using 4XTMF Module
+
-
(Dummy load with a 4.7K
Ω
, ¼ watt
resistor when no connection is made)