Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 383)

VIVOTEK
User's Manual - 383
© 2019 VIVOTEK INC. All Right Reserved
250
rtsp://10.10.1.2/mod.sdp?etime=20110312_040400.000&length=120
X X X V Play file file
rtsp://10.10.1.2/mod.sdp?filename=/mnt/link0/
© 2019 VIVOTEK INC. All Right Reserved
251
8.26 Fisheye Local Dewarp Camera Control (capability_fisheye >
0 and capability_fisheyelocaldewarp.c0 > 0, only support in 1R
mode)
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/camctrl/fdCamCtrl.cgi?channel=&stream=
[&move=] – Move home, up, down, left, right
[&zoom=] – Zoom wide, tele
[[&speedpan=][&speedtilt=][&speedzoom=]] – Set speeds
[&zooming=&zs=] – Zoom without stopping, used for joystick
[&vx=&vy=&vs=] – Shift without stopping, used for joystick
[&x=&y=&videosize=&resolution=&stretch=] – Click on
image (Move the center of image to the coordination (x,y) based on resolution or videosize of 1O
mode.)
[&return= ]
Example:
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=right
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&zoom=tele
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=top&speedtilt=-1
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&zooming=tele&zs=2
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&vx=5&vy=3&vs=2
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&x=700&y=700&videosize=19
20x1920&resolution=1920x1920&stretch=1
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
stream <0~(m-1)> Stream.
move home Move to home position.
up Move up.
down Move down.