Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 370)

VIVOTEK
370 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
238
8.18 Virtual Input (capability_nvi > 0)
Note: Change virtual input (manual trigger) status.
Method: GET
Syntax:
http:///cgi-bin/admin/setvi.cgi?vi0=[&vi1=][&vi2=]
[&return=]
PARAMETER VALUE DESCRIPTION
vi state[(duration)nstate]
Where "state" is 0, 1. “0”
means inactive or normal
state while “1” means
active or triggered state.
Where "nstate" is next
state after duration. Ex: vi0=1
Setting virtual input 0 to trigger state
Ex: vi0=0(200)1
Setting virtual input 0 to normal state, waiting 200
milliseconds , setting it to trigger state.
Note that when the virtual input is waiting for next
state, it cannot accept new requests.
return Redirect to the page after the
parameter is assigned. The should
be the relative path according to the root of
camera. If you omit this parameter, it will redirect
to an empty page.
* If the is invalid path, it will ignore
this parameter.
Return Code Description
200 The request is successfully executed.
400 The request cannot be assigned, ex. incorrect parameters.
Examples:
setvi.cgi?vi0=0(10000)1(15000)0(20000)1
No multiple duration.
setvi.cgi?vi3=0
VI index is out of range.
setvi.cgi?vi=1
No VI index is specified.
503 The resource is unavailable, ex. Virtual input is waiting for next state.