Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 361)

VIVOTEK
User's Manual - 361
© 2019 VIVOTEK INC. All Right Reserved
228
PARAMETER VALUE DESCRIPTION
y movement
w The scaled area size
h
resolution The resolution of streaming.
vx The direction of movement, used for joystick control.
vy
vs 0 ~ 7 Set the speed of movement, “0” means stop.
x x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
videosize The size of plug-in (ActiveX)window in web page
resolution The resolution of streaming.
stretch 0 indicates that it uses resolution (streaming size) as the
range of the coordinate system.
1 indicates that it uses
videosize (plug-in size) as the range
of the coordinate system.
speedpan -5 ~ 5 Set the pan speed.
speedtilt -5 ~ 5 Set the tilt speed.
speedzoom -5 ~ 5 Set the zoom speed.
speedapp 1 ~ 5 Set the auto pan/patrol speed.
return Redirect to the page after the parameter is
assigned. The should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the is invalid path, it will ignore this
parameter.
© 2019 VIVOTEK INC. All Right Reserved
229
8.9ePTZ Recall (capability_eptz > 0 and capability_fisheye = 0)
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/camctrl/eRecall.cgi?channel=&stream=&
recall=[&return= ]
PARAMETER
VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.
recall Text string less than
40 characters One of the present positions to recall.
return Redirect to the page after the parameter is
assigned. The should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the is invalid path, it will ignore this
parameter.
8.10 ePTZ Preset Locations (capability_eptz > 0 and
capability_fisheye = 0)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/operator/ePreset.cgi?channel=&stream=
[&addpos=][&delpos=][&return= ]
PARAMETER
VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.