Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 371)

VIVOTEK
User's Manual - 371
© 2019 VIVOTEK INC. All Right Reserved
238
8.18 Virtual Input (capability_nvi > 0)
Note: Change virtual input (manual trigger) status.
Method: GET
Syntax:
http:///cgi-bin/admin/setvi.cgi?vi0=[&vi1=][&vi2=]
[&return=]
PARAMETER VALUE DESCRIPTION
vi state[(duration)nstate]
Where "state" is 0, 1. “0”
means inactive or normal
state while “1” means
active or triggered state.
Where "nstate" is next
state after duration. Ex: vi0=1
Setting virtual input 0 to trigger state
Ex: vi0=0(200)1
Setting virtual input 0 to normal state, waiting 200
milliseconds , setting it to trigger state.
Note that when the virtual input is waiting for next
state, it cannot accept new requests.
return Redirect to the page after the
parameter is assigned. The should
be the relative path according to the root of
camera. If you omit this parameter, it will redirect
to an empty page.
* If the is invalid path, it will ignore
this parameter.
Return Code Description
200 The request is successfully executed.
400 The request cannot be assigned, ex. incorrect parameters.
Examples:
setvi.cgi?vi0=0(10000)1(15000)0(20000)1
No multiple duration.
setvi.cgi?vi3=0
VI index is out of range.
setvi.cgi?vi=1
No VI index is specified.
503 The resource is unavailable, ex. Virtual input is waiting for next state.
© 2019 VIVOTEK INC. All Right Reserved
239
Examples:
setvi.cgi?
vi0 =0(15000)1
setvi.cgi? vi0 =1
Request 2 will not be accepted during the execution time(15 seconds).
8.19 Open Timeshift Stream (capability_timeshift > 0,
timeshift_enable=1, timeshift_c_s_allow=1)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http:///_accessname>?maxsft=[&tsmode=&reft
ime=&forcechk&minsft=]
For RTSP (MP4 and H264), the user needs to input theURL below into an RTSP compatible player.
rtsp:///_accessname>?maxsft=[&tsmode=&refti
me=&forcechk&minsft=]
“n” is the channel index.
“m” is the timeshift stream index.
For details on timeshift stream, please refer to the “TimeshiftCaching” documents.
PARAMETER VALUE
DEFAULT DESCRIPTION
maxsft integer> 0 Request cached stream at most how many seconds
ago.
The value must be a positive integer. (>0)
tsmode normal,
adaptive normal Streaming mode:
normal => Full FPS all the time.
adaptive => Default send only I-frame for MP4 and
H.264, and send 1 FPS for MJPEG. If DI or motion
window are triggered, the streaming is changed to
send full FPS for 10 seconds.
(*Note: this parameter also works on non-timeshift
streams.)
tsmode must exactly match well-defined wording
(normal, adaptive), unknown parameters are always