45 lens configuration – Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision User Manual
Page 348
VIVOTEK
348 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
216
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
stopbit
1,2
4/4
"1"
: One stop bit is transmitted to
indicate the end of a byte.
"2"
: Two stop bits are transmitted to
indicate the end of a byte.
If you want to transfer the stopbit for
150% of the normal time used to
transfer one bit, the
uart_i<0~(n-1)>_stopbit should be set
as 2 and the uart_i<0~(n-1)>_databit
set as 5 as well.
uartmode
rs485
4/7
RS485 mode.
7.45 Lens Configuration
Group:
lens
for n channel products
n denotes the value of "capability_nvideoin"
(capability_image_c<0~(n-1)>_lensconfiguration_support = 1)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
selected
6/7
Current selected lens profile.
e.g. lens_selected=lens_default_i0, it
means choosen lens configuration is i0
lens of default group.
Group:
lens_default
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
totalnumbers
0,
6/7
Totoal support number of the default
lens profiles
Group:
lens_user
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
totalnumbers
0,
6/7
Totoal support number of the user lens
profiles