Connecting to a computer via digital input, Step 5, Step 6: step 4 – AAXA Technologies P7+ 550-Lumen Full HD LED SmPico Projector User Manual

Page 32

Connecting to a Computer via Digital Input

After connecting your projector to your computer or laptop via a digital input cable, you may need

to enabe Digital Video output on your computer. To enable Digital Video output on your computer

most computers require “turning on” the video output feature. Each computer is different. Please

consult your owner’s manual for instructions to enable Digital Video output. Below are standard

instructions for a Windows 10 computer – not all systems are the same.

Press Windows+P to toggle

through display settings. Select

either “Duplicate” or “Extend” de-

pending on your viewing option.

*NOTE: Different operating sys

tems may differ

Step 5:

1. Right click on computer

desktop and select “Screen

Resolution.”

2. Display Properties window

will pop up and select the

Advance Display Settings.

Please make sure the “Mul-

tiple displays” has the “Dupli-

cate these displays” option

selected and the Resolution

is 1920 x 1080 or below as

pictured in the red box.

4. If the image is blurry or the

text is not legible, adjust the

screen resolution.

Step 6:

Step 4:

This manual is related to the following products: