Vox Adio Air GT 2x3" 50W Bluetooth Guitar Amplifier User Manual

Page 16

Effect types

Effects 1 types (FX1 knob): modulation types

CHORUS

This models a stereo chorus, which creates a rich and spacious sound. Adjust the modulation

speed with the knob.

FLANGER

This models an analog flanger, which can create a sound with a d istinctive swell, like the sound

of a jet plane. Adjust the modulation speed with the knob.

PHASER

This models a popular analog phaser in a banana-colored box. Adjust the modulation speed

with the knob.

TREMOLO

This models the tremolo that gives periodic strength to sound and is built into US-made combo

amps. Adjust the tremolo speed with the knob.

Effects 2 types (FX2 knob) : delay/reverb types

A.DLY
(ANALOG DELAY)

This models an analog delay that uses a Bucket Brigade Device (BBD). Its audio quality is lo-fi,

but it is popular for its warm sound. Adjust the mix amount of the delay sound with the knob.

Set the delay time with the TAP button. The maximum delay time is approximately 1 seconds.

WIDE DLY
(WIDE DELAY)

This is a stereo delay effect that has slightly staggered notes from the right and left speakers. The

operation of the knob and button and the maximum delay time are the same as with A.DLY.

SPRING

This simulates the spring reverb that’s built into many guitar amps. Adjust the mix amount of

the reverb sound with the knob. Set the reverb time with the TAP button.

HALL

This models the reverberation of a concert hall containing numerous echo components. The

operation of the knob and button is the same as with SPRING.

Audio equalizer

This adjusts the tone of the audio input from the

AUX IN jack or via a Bluetooth connection.

Hold down the WIDE button for about 2

seconds. The WIDE LED blinks slowly, and the

USER PROGRAMS LEDs indicate the current

equalizer setting (the BANK LED lights up in

orange).

Press the BANK/MANUAL button or a USER

PROGRAMS button to change the equalizer

setting.

LEDs

Button

Setting

BANK/MANUAL OFF

LOUD

BASS BOOST

MID BOOST

TREBLE BOOST

Press the WIDE button. The BANK and USER

PROGRAMS LEDs return to their previous

indications.

Tip

Using Tone Room, you can change the settings
specified for 1 through 4.

Noise reduction

This applies a noise-reducing effect.

As with amps and effects, noise reduction must be set for

each program. If, while changing settings in the user
program mode, you switch to another program or to
manual mode or turn off the amp before saving the
settings, the changes that you made will be lost.

Hold down the WIDE button for about 1 second. The

WIDE LED blinks, and the USER PROGRAMS LEDs

indicate the noise reduction setting (the BANK LED

lights up in orange).

Press the BANK/MANUAL button or a USER PRO-

GRAMS button to change the level of the noise reduc-

tion.

LEDs

Button

Setting

BANK/MANUAL

OFF

Low

High

Press the WIDE button. The BANK and USER PRO-

GRAMS LEDs return to their previous indications.