Planar Systems UltraRes P Series 49" UHD 4K Commercial Monitor - Manual (Page 58)

58
Planar UltraRes P Series User Manual
020-1407-02A
Page | 58
Set Date and Time
• Set the internal system clock. If Use Network Time is unchecked, you can set the following
settings individually: Time Zone, Year, Month, Day, Date, Hour, and Minute.
• Note: If Use Network Time is checked and DHCP is unchecked, the display will be unable
to obtain the network time unless a DNS server is programmed. This is done via the DNS
Server setting in the Network menu or the serial command interface.
Set Event 1~Event 20
• Event Enabled: Turns on the event. If disabled, the settings are saved so that the event
can be re-enabled.
• Frequency: The frequency of the event. Options are Daily, Weekly, Weekdays,
Weekends.
• Action: The action to take for the event. Options are Turn On, Turn Off, Recall, Panel
Brightness.
•
Note (URP75 / URP85 / URP98): The Turn On action will not work if the Power Down
Mode setting is set to Standby Mode . To allow the Turn On action to occur, set
Power Down Mode to Networked Standby Mode or Fast Startup .
• Data: The preset to recall when the Action is set to Recall, or the backlight setting when
the Action is set to Panel Brightness.