Planar Systems UltraRes P Series 49" UHD 4K Commercial Monitor User Manual
Page 44
44
Planar UltraRes P Series User Manual
020-1407-02A
Page | 44
Zone 3
• Select the source displayed in Zone 3
•
Options:
HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, DP2, VGA;
Default:
HDMI 3
•
Note:
DP2 and VGA are supported on URP49 / URP55 / URP65 only.
Zone 4
• Select the source displayed in Zone 4
•
Options:
HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, DP2, VGA;
Default:
HDMI 4
•
Note:
DP2 and VGA are supported on URP49 / URP55 / URP65 only.
Zone 1 Secondary
• Second input to scan when Auto Scan Sources is set to
Failover
•
Options:
HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, DP2, VGA;
Default
: HDMI 1
•
Note:
DP2 and VGA are supported on URP49 / URP55 / URP65 only.
Auto Scan Sources
• Select whether the display will automatically scan for a valid source on any input or zone
that does not have a source currently displayed.
•
Options:
Off, On, Failover;
Default:
Off
•
Off:
Display will stay on current selection of inputs.
•
On:
Scanning will begin on the currently selected source and move sequentially through
the inputs in the order listed below
– stopping once a valid source is obtained.
•
Search Order:
HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, DP2, VGA
•
Note:
DP2 and VGA are supported on URP49 / URP55 / URP65 only.
•
Failover:
Display will scan selected Zone 1 input and selected Zone 1 Secondary input for
a valid source. Only applies to Zone 1.