Planar Systems UltraRes P Series 49" UHD 4K Commercial Monitor - Manual (Page 31)

31
Planar UltraRes P Series User Manual
020-1407-02A
Page | 31
13. Using the Display in Portrait Mode
When using the display in the portrait position and looking at the rear of the display, it should be
rotated according to the arrow stickers on the back of the display. This will allow for proper
ventilation. Then select the OSD rotation of landscape or portrait on the OSD menu
(MAIN MENU > ADVANCED SETTINGS > MENUS AND MESSAGES > OSD ROTATION).
For reference, the following list indicates the rotation direction of each display model when
placed in portrait mode as viewed from the display side:
• URP49(-T): Counterclockwise
• URP55(-T): Counterclockwise
• URP65(-T): Counterclockwise
• URP75(-ERO-T): Counterclockwise
• URP85(-ERO-T): Counterclockwise
• URP98(-ERO-T): Counterclockwise
Caution: Failure to follow these instructions will void the warranty.
14. Using the Display in Flat or Tilted Orientation
The display is not recommended for use in flat orientation for tabletop, floor, or ceiling
installations. LCD panels of this size are at risk of panel deflection, which can cause cosmetic
sagging, brightness uniformity issues, a shortened life span, and malfunction of optional touch
sensors. Installations where the display is tilted downward or upward at an angle may also be
prone to these issues and are not recommended.
Note: Failure to follow these instructions will void the warranty.