Advanced application, Creating a catchlight, Using the wide panel – Godox TT600 Thinklite Flash User Manual
Page 19
- 36 -
● Creating a Catchlight
With the catchlight panel, you can create a catchlight in the subject’s
eyes to add life to the facial expression.
Point the flash head upward
by 90°.
Pull out the wide panel.
The catchlight panel will
come out at the same time.
Push the wide panel back in.
● Push in only the wide panel.
● Follow the same procedures
as for bounce flash.
● Using the Wide Panel
Pull out the built-in wide panel to enlarge the flash lighting range, so
as to get more softened and natural lighting effect.
Pull out the wide panel and
place it over the flash head as
shown. The flash coverage will
then be extended to 14 mm.
● The catchlight panel will come
out at the same time. Push
the catchlight panel back in.
● Point the flash head straight ahead and then upward by 90°.
The catchlight will not appear if you swing the flash head left
or right.
● For best catchlight effect, stay 1.5m/4.9ft away from the
subject.
Advanced Application
1
2
3