Godox TT600 Thinklite Flash - Manual (Page 18)

- 35 -
2. Other Protections
The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference:
Prompts on
LCD Panel
Meaning
E0
A failure occurs on the temperature sensor.
Please send this kit to a maintenance center.
E1
A failure occurs on the recycling system so that
the flash cannot fire.
Please restart the flash unit. If the problem
still exists, please send this product to a
maintenance center.
E2
The system gets excessive heat. Please allow a
rest time of 10 minutes.
E3
The voltage on two outlets of the flash tube
is too high. Please send this product to a
maintenance center.
● Bounce Flash
By pointing the flash head toward a wall or ceiling, the flash will
bounce off the surface before illuminating the subject. This can
soften shadows behind the subject for a more natural-looking shot.
This is called bounce flash.
To set the bounce direction, hold the flash head and turn it to a
satisfying angle.
Advanced Application
Protection Function
360
-7-90
● If the wall or ceiling is too far away, the bounced flash might
be too weak and result in underexposure.
● The wall or ceiling should be a plain, white color for high
reflectance. If the bounce surface is not white, a color cast
may appear in the picture.