Bolt VB-22 Bare-Bulb Flash User Manual
Page 27
Using the Reflector and Diffuser
|
27
USING THE REFLECTOR AND DIFFUSER
1. Rotate the Accessory Locking Ring in a
counterclockwise direction until loose.
2. Slide the reflector into the Accessory Mount.
3. Rotate the Accessory Locking ring clockwise until
tight.
4. If desired, snap the diffuser and retaining ring onto
the front of the reflector.
NOTE: Other dedicated accessories, such as snoots,
beauty dishes, and grids, can be mounted similarly. For
a list of recommended accessories, see page 32 in this
manual.