Moza Slypod Pro Master Kit - Manual (Page 4)

3
● Release the heading adjustment knob to adjust the heading angle of
gimbal and ensure the gimbal’s position and level.
● Release the roll and pitch adjustment knob and adjus the angle of
roll/pitch at the same time, and then screw it when it is suitable.
● Release the gimbal lock and install the standard Arca quick release
plate, then lock the gimbal.
Attaching the Tripod to The SLYPOD PRO
Align the tripod with the 1 / 4" mount of the SLYPOD PRO. Rotate the tripod until
it is hand tight.
Install
Arca-Swiss Quick Release
Pan-and-Tilt Head
Pan Knob Screw
Knob Screw
Pan-Tilt Lock
Quick Release
Plate Pan-Tilt Lock
The SLYPOD PRO’s body is supported by an Arca-Swiss quick release plate
with a 1/4” and a 3/8” mount. Use the SLYPOD PRO like a motorized slider by
mounting the SLYPOD PRO horizontal.
3/8” Mount
1/4” Mount
1/4” and 3/8”
Extension Hole