GRAM KF 482064 FN/1 - Manual (Page 74)

EN
73
If your fridge is not operating;
• Is there a power failure?
• Is the plug connected to the socket correctly?
• Is the fuse of the socket to which the plug is connected or the main
fuse blown?
• Is there any failure at the socket? To check this, plug your refrigerator
to a socket this is surely operating.
If your fridge is not cooling enough;
• Is the temperature adjustment right?
BEFORE CALLING GRAM SERVICE
ERROR TYPE MEANING WHY WHAT TO DO
E10
"Refrigerator comp.
Not Cold enough"
Ideal temperature for
Ref. Compartment is
+4 o C. If you see this
warning your foods
have risk of spoiling.
This warning
becomes visible
if electricity is off
for a long time
(most probably) or
the refrigerator is
activated for the
first time or hot food
is loaded to the
appliance.
1. Set the refrigerator
temperature to colder values
or set the super cooling
mode until the compartment
gets to normal temperature.
2. Do not open the door
much until this failure is off.
3. Please empty the location
at the front area of air duct
channel holes.
4. Please be careful while
loading the appliance in order
not to avoid the ventilation
at the areas which are very
close to the sensor.
5. Please don’t open the
refrigerator doors frequently
until the warning disappears.
6. If the warning continues,
please contact with
authorized technical service.
E11
Refrigerator comp.
too Cold
The foods starts to
freeze because of
the too much cold
temperature.
This warning means
that the temperature of
the cooler compartment
is very low. Therefore,
this ambient condition
may lead to the
freezing of foods in the
compartment.
1. Check if the “Super cooling
mode” is on.
2. Decrease the refrigerator
temperature values.
3. If the warning continues,
please contact with
authorized technical service.