GRAM KF 482064 FN/1 - Manual (Page 73)

EN
72
BEFORE CALLING GRAM SERVICE
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in
improper levels or when a problem occurs in the appliance. Warning
codes are displayed in the freezer and cooler Indicators.
ERROR TYPE MEANING WHY WHAT TO DO
E01 Sensor warning
Call Service for assistance as
soon as possible.
E02 Sensor warning
Call Service for assistance as
soon as possible.
E03 Sensor warning
Call Service for assistance as
soon as possible.
E06 Sensor warning
Call Service for assistance as
soon as possible.
E07 Sensor warning
Call Service for assistance as
soon as possible.
E08
"Low voltage
Warning"
When the power supply
gets lower than 170 V
the appliance gets to
steady position.
• This is not a failure. This
prevents any damages
on the compressor. This
warning will off after the
voltage gets required
level.
• If the warning continues,
please contact with
authorized technical
service.
E09
Freezer comp. Not
Cold enough
This caution will be
seen especially after
long term of power
failure
1. Do not freeze the foods
that are thaw and use in
short time period.
2. Set the freezer
temperature to colder values
or set the super freeze , until
the compartment gets to
normal temperature.
3. Do not put fresh food until
this failure is off.
4. Please don’t open the
refrigerator doors frequently
until the warning disappears.
5. If the warning continues,
please contact with
authorized technical service.