GRAM KF 482064 FN/1 - Manual (Page 48)

EN
47
BEFORE USING THE APPLIANCE
• When your fridge is placed next to a deep freezer, there
should be at least 2 cm between them to prevent humidity
forming on the outer surface.
• Do not place anything on your fridge, and install your fridge
in a suitable place so that at least 15 cm of free space is
available above it.
• Use the adjustable front legs to make sure your appliance
is level and stable. You can adjust the legs by turning them
in either direction. This should be done before placing food
in the fridge.
• Before using your fridge, wipe all parts with a solution of
warm water and a teaspoon of sodium bicarbonate, then
rinse with clean water and dry. Place all parts in the fridge
after cleaning.
• Install the plastic distance guide (the part with black vanes
at the rear) by turning it 90° (as shown in the figure) to
prevent the condenser from touching the wall.
• The refrigerator should be placed against a wall with a free
space not exceeding 75 mm.
Before Using your Fridge
• When using your fridge for the first time, or after
transportation, keep it in an upright position for at least 3
hours before plugging into the mains. This allows efficient
operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the
first time. This is normal and the smell will fade away when
your fridge starts to cool.