Yamaha PSR-S770 - Manual (Page 93)

PSR-S970/S770 Owner’s Manual 93
Mic
ro
p
hon
e/
Gu
it
ar
Inp
ut – Usin
g a
M
icr
op
hone
or Gui
tar wi
th
the
I
nst
rument
–
8
These are special effects that graft the characteristics of your voice input from the microphone onto synthesizer and
other sounds, for unusual machine‐like or robotic effects, as well as unique choir sounds, which you can control
with your own singing and playing.
1
Carry out steps 1 – 4 in “Using Vocal Harmony” on page 91.
2
From the Vocal Harmony Type Selection display, use the TAB
[][] buttons to select the SYNTH VOCODER tab.
3
Press one of the [A] – [J] buttons to select the desired Synth
Vocoder type.
4
Make sure that the [4 ] (HARMONY) buttons in the MIC/
GUITAR SETTING display is set to ON.
If necessary, use the [5 ] (VOCAL EFFECT) buttons to turn on the Vocal
Harmony effect which can be set on the display called up via the [8 ]
(EDIT) buttons. For details, refer to the Reference Manual on the website.
5
Try holding down a note on the keyboard and speak or sing into
the microphone.
Also, try changing notes as you say/sing different words, hitting a separate note
for each word.
Using Synth Vocoder (PSR-S970)
3
2
NOTE
To return to the MIC/GUITAR SETTING
display, press the [EXIT] button.
NOTE
You can change the keyboard setting
(OFF/UPPER/LOWER), determining
which part of the keyboard (or Song)
controls the effect. See steps 8-1 and
8-2 on page 92.
12psrs970_en_om.book Page 93 Friday, June 26, 2015 3:33 PM