Yamaha PSR-S770 - Manual (Page 45)

PSR-S970/S770 Owner’s Manual 45
V
o
ic
es
– Pla
ying
the
k
e
yboa
rd
–
1
You can create original Organ Flutes Voices by editing the preset Organ Flutes
Voices. Just as on a traditional organ, the original Voices can be created by
increasing and decreasing the levels of the flute footages. The created Voices can be
saved to internal memory (USER drive) or a USB flash drive for future recall.
1
Press the [ORGAN FLUTES] button.
The FOOTAGE page of the Voice Set display of the last selected Organ Flutes
Voice is called up.
If you want to edit another preset Organ Flutes Voice, press the [I] (PRESETS)
button to call up the Organ Flutes Voice Selection display, and select as desired.
Then, press the [5 ] (VOICE SET) button to return to the Voice Set display.
2
Use the [1 ] – [8 ] buttons to adjust the footage settings.
The footage settings determine the basic sound of the Organ Flutes.
The [1 ] buttons control two footages: 16’ and 5 1/3’. Pressing the [D]
button switches between these two footages.
If you want, you can select the Organ type and change other settings, such as
Rotary Speaker and Vibrato.
Creating Your Original Organ Flutes Voices
NOTE
The term “footage” is a reference to the
sound generation of traditional pipe
organs, in which the sound is pro-
duced by pipes of different lengths (in
feet).
NOTE
Pressing the [D] button while holding
down one of the [1
] buttons can
select both two footages, and lets you
set the same value for them by using
the Data dial.
3
For details on the VOLUME/ATTACK Page and EFFECT/EQ
Page, see the Reference Manual on the website.
[A]/[B] ORGAN TYPE Specifies the type of organ tone generation to be simulated.
SINE: Produces a clean, clear sound.
VINTAGE: Produces a gritty, slightly distorted sound.
EURO (PSR-S970 only): Produces the sound of the transistor electronic organ
equipped with the electronic tremolo.
[C] ROTARY SP
SPEED Alternately switches between the slow and fast rotary speaker speeds when a rotary
speaker effect is selected for the Organ Flutes (DSP TYPE parameter in the
EFFECT/EQ Page), and the VOICE EFFECT [DSP] button is turned on.
[F]/[G] VIBRATO Alternately turns the vibrato effect for the Organ Flutes Voice ON or OFF.
[H] VIBRATO
DEPTH Sets the Vibrato depth to one of three levels:
1 (low), 2 (mid), or 3 (high).
NEXT PAGE
12psrs970_en_om.book Page 45 Friday, June 26, 2015 3:33 PM