ProSoft Technology 5301-MBP-ASCII - Manual (Page 40)

Serial Port Modbus Error and Status Data MBP ♦ ProLinx Gateway
Protocol Manual Modbus Plus
Page 40 of 52 ProSoft Technology, Inc.
May 12, 2011
6.4.1 Module Status Values
The following table lists the module status values that may be found in register
4370:
Normal Operation Codes Description
0x00 Interface is operational.
Interface Crash Codes
0x01 2-second Interface Timeout
0x02 Bad Interface Opcode
0x03 Interface Data Error
0x04 Interface Test Error
0x05 Interface X-Fer Done Error
0x06 Bad Interface Path
0x07 Bad Interface State
0x08 Bad Interface Length
0x09 Global Data Length Error
0x0A Global Data Address Error
0x0B Global Data Not Present
Fatal Crash Codes
0x81 PROM Checksum Error
0x82 Internal RAM Data Test Error
0x83 External RAM Data Test Error
0x84 External RAM Address Test Error
0x85 Bad Confidence Test Index
0x86 External Int 0 Event Error
0x87 External Int 1 Event Error
0x88 DMA Int 0 Event Error
0x89 Comm. Int Event Error
0x8A XMIT-No Good Event Error
0x8B No Response Timeout MAC State
0x8C No Response Timeout MAC Idle
0x8D Receive OK MAC State
0x8E Transmit OK MAC State
0x8F No Receive Buffer Free
0x90 Bad Input Transfer Length
0x91 Reserved Rev Buffer Error
0x92 Bad Trans Control State
0x93 Bad Word Request Bit
0x94 Node Queue Overflow
0x95 Bad Data Queue Error
0x96 Empty Data Path Error
0x97 Bad Path Search Index
0x98 Bad Data Slave Path