iSys V8.5e Thermal Printer - Manual (Page 10)

10
2. SPECIFICATIONS
2.1
FUNCTIONAL
Operation
Command panel Front mounted.
LED display.
Three push buttons.
Online/Offline, Data and error LED’s.
Command modes Bimodal Plotting mode.
Grayscale mode.
Printing mode.
Features
Bimodal (black and white) plotting.
Grayscale plotting.
Plot speed up to 4.0 inches per second.
Microprocessor controlled.
Automatic head temperature feedback
Panel settings ~ On-line, off-line.
~ Test plot, test print.
* Contrast C1, C2, C3, C4, C5, C6, C7, C8.
* Plot speed select 1”, 2”, 3”, 4” per second.
* Media select LP, HP, LF, HF.
~ Scaling (positive and negative) S0, S1, S2,
S3, S4, S5, S6, S7, S8, S9, SA, SB, SC, SD, SE.
~ Vertical emulation.
P0, n0 for 200 dots per inch vertical emulation.
P3, n3 for 203 dots per inch vertical emulation.
P selects positive scaling, n selects negative scaling.
Form feed adjust F2, F4, F8, tF, PF – selects Form feed of 2, 4, 8 inches, Top of Form
sensing, and programable past top of form respectively.
~ Bytes per scan b1, b2 - selects 216 and 264 bytes per scan respectively.
~ Grayscale levels per scan g1, g2, g3, g4 - selects 8, 16, 32, and 64 levels of gray levels
per scan respectively.
~ Grayscale media calibration table number t1, t2.
Settings marked with (*) are used exclusively with bi-modal plotting.
Settings marked with (#) are used exclusively with grayscale plotting.
Settings marked with (~) are used with both bi-modal and grayscale
plotting.