Irritrol MC-E User Manual

Page 16

Delete Program Start Time

Step 1 – Place the Function Dial to the SET PROGRAM position.

Step 2 – Enter the program number (1–8) being modified. Press the

to activate the selection.

Press the

button to clear any “Key Entry Error”.

Step 3 – Press the

button to review all start times. Each programmed start times will be displayed momentarily

until the last start time is shown.

Step 4 – Enter the start time number (1–8) being deleted and press the

button. Assign a start time of 0 and

press

to finalize.

After deleting a Start, MC-E will renumber remaining the start times to fill the empty start time slot.

i.e., After deleting start time 1, start time 2 will fill in start time 1 slot and so on.

Step 5 – Return the Function dial to AUTO/RUN

position to exit SET PROGRAM.

Step 6 – Repeat Steps 1–5 to delete additional start times.