H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 122)

10-8
Configuring Information Center
Information Center Configuration Task List
Complete the following tasks to configure information center:
Task Remarks
Outputting System Information to the Console Optional
Outputting System Information to a Monitor Terminal Optional
Outputting System Information to a Log Host Optional
Outputting System Information to the Trap Buffer Optional
Outputting System Information to the Log Buffer Optional
Outputting System Information to the SNMP Module Optional
Outputting System Information to the Web Interface Optional
Saving System Information to a Log File Optional
Configuring Synchronous Information Output Optional
Outputting System Information to the Console
Outputting system information to the console
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
See Table 10-2 for default channel
names.
Configure the channel through
which system information can be
output to the console
info-center console channel
{ channel-number | channel-name }
Optional
By default, system information is
output to the console through
channel 0 (known as console).
Configure the output rules of
system information
info-center source
{ module-name | default } channel
{ channel-number | channel-name }
[ debug { level severity | state
state } * | log { level severity | state
state } * | trap { level severity |
state state } * ] *
Optional
See Default Output Rules of
System Information .
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap } { boot |
date | none }
Optional
The time stamp format for log, trap
and debugging information is date
by default.
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.