H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 103)

7-11
z The following log information is displayed on the terminal when the NMS performs the SET
operation to the agent.
%Jan 1 02:59:42:576 2006 Sysname SNMP/6/SET:
seqNO = <11> srcIP = <1.1.1.2> op = errorIndex = <0> errorStatus = node =
value =
Table 7-1 Description on the output field of SNMP log
Field Description
Jan 1 02:49:40:566 2006 The time when SNMP log is generated
seqNO Sequence number of the SNMP log ()
srcIP IP address of NMS
op SNMP operation type (GET or SET)
node Node name of the SNMP operations and OID of the instance
erroIndex Error index, with 0 meaning no error
errorstatus Error status, with noError meaning no error
value
Value set when the SET operation is performed (This field is null, meaning the
value obtained with the GET operation is not logged.)
When the value is a string of characters and the string contains characters not
in the range of ASCII 0 to 127 or invisible characters, the string is displayed in
hexadecimal. For example, value = <81-43>[hex]
The system information of the information center can be output to the terminal or to the log buffer. In this
example, SNMP log is output to the terminal. For information about the configuration of SNMP log
output to other destinations, see Information Center in the Network Management and Monitoring
Configuration Guide.