ZeeVee ZvBox 170 Front Panel - Manual (Page 14)

ZvBox ® 170 Configuration Manual Page 14
www.zeevee.com Rev 1.0
Show Status Display Description
Display Lines Descriptions of Possible Status Readouts
Hit + ‐ to scroll Operating instructions
Transmitting Transmitting status:
• Transmitting = broadcasting normally
• RF‐power off = RF output power has been turned off
• Scanning cable = Currently scanning for open and occupied channels
• Channel conflict = Set to broadcast on an occupied RF channel
V‐in Video input:
• Not cfg = No video source detected
• Test‐image 1 = showing internally generated test image 1
• Test‐image 2 = showing internally generated test image 2
• 1280 x 720 (or other resolution) = resolution of input source
• Undetected = no incoming video detected
• Unsupported = unsupported video resolution from input source
V‐out Video output:
• Power off = RF output is turned off
• 720p (or other resolution) = video resolution currently output from ZvBox
A‐in Audio input:
• Not cfg = No audio source detected (or no video source detected)
• PCM = audio source is USB, and/or audio input is PCM
• Undetected = no audio source detected
• AC3 = audio input is AC3 format
• DTS = audio input is DTS format, this is not supported
• Unknown = unknown audio format
A‐out Audio output:
• Power off = RF output is turned off
• AC3 = an audio source is detected, ZvBox is outputting AC3 audio
• No output = either no input detected, or unknown audio format from input
source
SN Shows serial number of ZvBox
HW Shows hardware version of ZvBox
SW Shows firmware version of ZvBox
Temp Temperature status
• Okay = normal operating temperature
• Warning = Hotter than normal operating temperature
• Critical = Unit about to shut down automatically
Up Uptime = shows how long ZvBox has been running since power on or reboot
CC Closed captioning adaptor status:
• Connected = ZVCC closed captioning adapter connected
• Not connected = no ZVCC closed captioning adapter connected