ZeeVee ZvBox 170 Front Panel - Manual (Page 12)

ZvBox ® 170 Configuration Manual Page 12
www.zeevee.com Rev 1.0
Visual Watermark
ZvBox® overlays a Zv logo in the lower right corner of the broadcast stream. The logo has a ‘heartbeat’,
slowly appearing and disappearing. This is used to identify a ZvBox® as being the source of video. This
visual mark can be disabled, however, every encoded video stream also has an embedded digital
watermark containing information about the ZvBox® and system that created it, that cannot be
removed. This is added to help trace the source of potentially pirated video, and does not affect visual
quality in any way.
Syntax
SET WATERMARK {off | on } factory default: on
Miscellaneous Commands
Reset to Factory Defaults
This command resets all settings to their original factory defaults. It is especially useful when some prior
configuration change causes the system to malfunction. Defaults are listed in this document in the
command summary, and with each command description. The unit will reboot after it has reset to
factory defaults.
Note that when configuring ZvBox® via ZvCli (with a PC via the USB connection), you can use the ‘script’
command to save the configuration to a file before setting to factory defaults, and also to restore the
configuration from that file.
Syntax
RESET DEFAULTS
Front Panel Lockout
To prevent accidental changes to ZvBox® settings, the front panel buttons can be locked.
Syntax
LOCK FRONT PANEL
Note: The panel can be unlocked by simultaneously pressing all four buttons: Next, +, ‐, and OK.
Set Language
The ZvBox® 170 supports both English and Spanish languages at the Front Panel Display.
Syntax
SET LANG/IDIOMA {English | Español} factory default: English
Sets the language that is displayed on the Front Panel Display.