Omnia Audio Omnia.11 - Manual (Page 96)

80
The factory defaults are Ports 4545 & 4546, respectively.
Of note here is that the Java remote screen looks exactly like the front panel of the unit and works similarly, with
some exceptions and additions.
Normally, the mouse is used to select buttons and controls and the Up & Down arrows on your computer’s keyboard
are used to adjust controls. The mouse wheel (on mice so equipped) can also be used to adjust the controls.
To select a control to adjust, first click on the desired Icon Button at the top of the screen and then click on a desired
Tab or button if needed and finally on an adjustment control. It will then highlight in a brighter orange color
indicating it is ready for adjustment with either the mouse wheel or arrow keys.
Please note that on smaller monitors or laptops you may not be able to see the entire screen at once. If that is the
case, scroll bars will appear to the right and at the bottom of the screen. This is normal.
Virtually everything you can do from the front panel, you can also do with the remote except for Network setup and
the Backlight & Calibrate controls in the System setup menu that are specific to the front panel’s touch screen.
Your computer’s keyboard can be used to enter text whenever the on-screen keyboard pops up.
Data Mgmt
The Data Management menu allows you to save and load User Presets and I/O Configurations to and from your
computer.
From the top menu in the Remote screen, click “Data Mgmt” or from the Main Menu, click the “User Data
Management” option.
Preset File Transfer
Shown below is the top half of the File Transfer screen, which is used for saving and loading user processing presets
to and from your computer.
Any user presets on the Omnia.11 will show up as buttons under User Presets in the Download Presets section.
2 user presets are shown in the example screenshot above.
NOTE: The factory presets will not show up here and cannot be downloaded to your computer.
To download and save a user preset to your computer, simply click on a preset name and your browser’s “File
Download” box should pop up.