Omnia Audio Omnia.11 - Manual (Page 87)

71
External Sync Range: Accepts sample rates from 32kHz to 96 kHz.
Used for synchronization of the Digital Output signal to an external
reference. Automatically accepts sample rates between 32 and 96 kHz.
Connector: XLR-female, EMI-suppressed. Pin 1 chassis ground, Pin 2-3
transformer isolated, balanced, and floating. Standard AES3 specified
balanced 110 ohm input impedance.
External Sync Range: Automatically accepts sample rates between 32kHz and 96kHz.
Connector: XLR-female, EMI-suppressed. Pin 1 chassis ground, pins 2 and 3 transformer isolated,
balanced, and floating – AES3 standard 110 ohm impedance.
Remote Control: Via Ethernet. TCP/IP control via built-in Java (TM) based remote control program
integrated into web page interface. All software is served from the built-in web server to
any standard web browser; there is nothing to install on the user's computer.
Ports Used: The normal http port 80 and TCP ports 93, 4545 & 4546.
Connectors: Ethernet - Industry standard EMI-suppressed RJ-45 connector.
GPI Interface: (Support not yet available)
Connector: EMI suppressed DB-15 female connector.
Power Requirements: Voltage: 100-250 VAC, 47-63 Hz, Less than VA.
Power Connector: EMI suppressed IEC male.
Detachable 3-wire power cords supplied for US and European use.
Power Supply: Internal. Overvoltage and short circuit protected. Meets EN55022, EN55011 Level B
Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3 immunity compliant. Full
international safety approval. CE marked.
Environmental: Operating Temperature: 32 to 122 deg. F / 0 to 50 deg. C for all operating
voltage ranges. Humidity: 0-95% RH, non-condensing.
Dimensions: 19" wide x 7” high x 20” deep (48 cm wide x 18 cm high x 51 cm deep) including
connectors. Unit requires four EIA rack spaces for mounting.
Shipping Weight: 36 lbs. / 16.3 kg
Telos/Omnia Research and Development is constantly working to improve the quality of our products.
Actual specifications are subject to change or improvement without notice.