MovinCool Classic 40 - Manual (Page 31)

31
OPERATION
Features
1. A digital electronic control panel, which allows the user to easily control the
unit’s operation.
2. Digital LED display that indicates:
a. Room temperature and set point temperature
(either Fahrenheit or Celsius)
b. Status codes
3. The set point temperature can be adjusted between 75 °F (24 °C) and 95 °F
(35 °C) by the SET TEMP buttons ( / ).
4. Fire alarm control panel connection with automatic shut off.
5. Automatic shut off, warning signal output and alarm for temperature sensor
failure, lose of cooling, and conditions of self-diagnostic codes.
6. An automatic restart feature when the power is lost and regained. The unit
returns to the operating mode it was in prior to the loss of power.
7. Enable and disable function for wall thermostat connection.