Marantz SA11S3N - Manual (Page 25)

18
Getting started
Basic connections
Operation
Index
Explanation of terms
Troubleshooting
Specifications
ENGLISH
Getting started
Basic connections
Operation
Index
Explanation of terms
Troubleshooting
Specifications
Playing a USB memory device
Playable USB memory formats
Files created in the following formats and stored on a USB
memory device can be played.
n USB-Compatible file systems
FAT16 or FAT32
• If the USB memory device is divided into multiple
partitions, only the top drive can be selected.
n Maximum number of playable files and folders
This depends on the specification of the USB memory
device (FAT16 or FAT32).
n File format
MP3 (MPEG-1 Audio Layer-3)
WMA (Windows Media Audio)
AAC (Advanced Audio Codec)
WAV (Linear PCM)
n Tag data
ID3-TAG (Ver.1.x and 2.x)
WMA-TAG
AAC-TAG
The title, artist, and album tag data are supported.
Playable MP3/WMA file
File format
Sampling
frequency
Bit rate Extension
MP3
32, 44.1,
48 kHz
MPEG-1 Audio
Layer-3, 32/40/48/56
/64/80/96/112/128/1
60/192/224/256/
320 kbps
.mp3
WMA
32, 44.1,
48 kHz
CBR: 48 – 320
VBR: Peak 384
(display corresponds
to average bit rate
value)
.wma
AAC
32, 44.1,
48 kHz
8 – 320 kbps .m4a
LINEAR
PCM
Linear
PCM: PCM
32/44.1/48
Those other
than the above,
not supported.
Linear PCM: 16 bit .wav
• Only music files that are not copyright-protected can be
played on this set.
• Contents downloaded from pay sites on the Internet are
copyright protected. Also, files encoded in WMA format
when ripped from a CD, etc., on a computer may be copyright
protected, depending on the computer’s settings.
Playing files stored on USB memory devices
1 Press DISC/INPUT to change the
input source to “USB”.
2 Connect the USB memory device
to the USB terminal on the front
panel of this unit. (vpage 10)
3
Press ui to select a file/folder
you want to play back and press
ENTER , p or 1 .
4
Press ui to select a file and
press ENTER , p or 1.
Playback starts.
1.SA-11S3N_ENG_Final_0525.indd 18 2012/05/25 17:14:06