Marantz SA11S3N - Manual (Page 21)

14
Getting started
Basic connections
Operation
Index
Explanation of terms
Troubleshooting
Specifications
ENGLISH
Getting started
Basic connections
Operation
Index
Explanation of terms
Troubleshooting
Specifications
Having the display and the illumination
lamp off
The display circuit operation can be stopped to minimize noise
from the display and the display circuit which could interfere
with the analog audio output signal.
During playback, press DISPLAY .
Off On
• Each time you press DISPLAY , the
LCD display and the illumination lamp
(blue) switch ON/OFF at the same
time.
• When the display is switched off, the “DISPLAY OFF”
indicator lights.
• If you press the DISPLAY at any time other than during
playback, the LCD display and the illumination lamp (blue) do
not light off.
NOTE
During stop mode, the display information does not turn off.
The information is turned off only during playback.
Having the illumination lamp always off
The following procedure makes the illumination lamp always
off regardless of the display ON/OFF operation.
Press and hold DISPLAY for two
seconds and longer while playback is
stopped.
• Press and hold DISPLAY for two
seconds and longer while the lamp
is always off to return to the normal
setting.
Playback CDs
Display switching
Displays text and time information stored on media.
• The display content varies according to the media. (The text
information is only displayed for SACD.)
• The display content during playback and when stopped varies
according to the media.
• Text information displays in a scroll format.
• Characters that can be displayed are uppercase/lowercase
alphabets, numbers, and some symbols.
Press INFO button.
The display switches each time the
button is pressed.
GWhen stoppedH
SACD :
Total number of tracks
Album name Artist name
CD : Disabled
GDuring playback (pause)H
SACD :
Elapsed time for the
played back track
Remaining time for the
played back track
Total remaining time
for all tracks
Track name
CD :
Elapsed time for the
played back track
Remaining time for the
played back track
Total remaining time
for all tracks
Listening with headphone
Plug the headphones into the headphone jack (PHONES).
n Adjusting the Volume
Turn LEVEL .
NOTE
To prevent hearing loss, do not raise the volume level
excessively when using headphones.
n Stopping the headphones output
The headphones circuit operation can be stopped to
minimize noise from the headphones circuit which could
interfere with the analog audio output signal.
Press PHONES .
Off On
• The headphones off indication lights when the headphones
circuit is stopped.
Playing repeatedly (Repeat Playback)
Press REPEAT to select repeat mode.
• When REPEAT is pressed each time,
the display switches repeat modes in
the following order.
Not Displayed
Repeat off
RPT
All-track repeat
1 RPT
1-track repeat
[Selectable items]
RPT (All-track repeat) : All tracks are played
repeatedly.
1 RPT (1-track repeat) : Only 1 track is played
repeatedly.
Not Displayed (Repeat off) : Normal playback resumes.
1.SA-11S3N_ENG_Final_0525.indd 14 2012/05/25 17:14:04