Marantz HD-DAC1 - Manual (Page 55)

o No sound comes out
Symptom Cause / Solution Page
No sound is produced. Or
sound is distorted.
0
Check the connections for all devices. 15
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Check the amplifier’s functions and controls and adjust as necessary. －
0
Check that a proper input source is selected. 26
0
The volume is set to the minimum level. Adjust the volume to a suitable level. 26
0
Cancel the mute mode. 26
0
Switch “AMP Gain” to “Mid” or “High” if using headphones with high impedance or low sensitivity. －
When the volume is
increased, sound from the
audio output connectors
(VARIABLE) is distorted.
0
If the “AMP Gain” setting is “High” or “Mid”, switch it to “Low”. 49
o Sound is interrupted or noise occurs
Symptom Cause / Solution Page
Sound is interrupted during
playback of tracks saved
on a computer.
0
Do not start applications other than the player software while playing music on your computer. －
Contents Connections Playback Settings Tips Appendix
55 Front panel Display Rear panel Remote Index