Marantz Wizz.it 3 - Manual (Page 7)

5
ACTION WINDOW
u
w
e
r
t
y
o
i
q
q Action List
This list sets the One Touch Operation (Macro).
w Add IR Code
This is used when setting the IR command to be sent. (Refer to page 6, Add IR Code Window .)
e Create Link
This sets the links for the Action List. (Refer to page 10, Create Link Window .)
r Add Delay
This sets a delay time between commands in the action list if necessary. The adjustment range is 0.1
to 32 seconds in 0.1 sec/step.
t Create Jump
This sets which page is jumped to in the middle or end of the action list. (Refer to page 10, Create
Jump Window .)
y Add Beep
This sets the beep sound in the action list. (Refer to page 11, Add Beep Window .)
u Punch Through
Click to insert a check mark in the check box when setting the same command code as the hard button
of each device. This cannot be set by the soft buttons.
i Sleep Timer
This is set when the sleep timer is used to send the action list. Click to insert a check mark in the check
box. In the sleep time setting, the sending of commands is set by the remote controller. (Refer to the
RC3001 User Guide.)
o Test IR
This performs a test transmission of IR commands from the remote controller connected to the PC from
IR codes selected in the action list.
RC3001_E_Wizzit3_ENG.indd 5 RC3001_E_Wizzit3_ENG.indd 5 07.9.11 5:05:21 PM 07.9.11 5:05:21 PM