Marantz Wizz.it 3 - Manual (Page 4)

2
INSTALLING Wizz.it 3
1. At fi rst, you download the software Wizz.it 3 from the Home Entertainment section of your region in
Marantz Website http://www.marantz.com.
2. Open the downloaded fi le in your PC and follow the on screen instructions to install the editor.
Notes:
You can install Wizz.it 3 together with other Marantz editors.
The fi les of Wizz.it 3 are automatically placed in a separate directory.
CUSTOMIZING THE CONFIGURATION FILE
During the installation of the editor, one confi guration fi le was also saved on your PC.
There is one default confi guration fi le which you can start from to create a custom confi guration fi le (CF)
(defaultRC3001.mcf).
The default CF is constructed in such a way that they can be easily adjusted to the needs of every
customer.
• This fi le contains the main Marantz remote control codes for enabling control of Marantz products with
the default settings.
CONNECTIONS
CONNECT PC AND REMOTE CONTROLLER
1.
The attached USB cable connects to the USB port of remote controller and the USB port of your
PC
2. Open the USB Device wizard menu in your PC automatically.
3.
Select the automatic scanning of USB driver or select the location of USB driver.
The location of RC2001_3001 USB driver
C:\Program Files\Marantz\Marantz Wizz.it 3
Note:
The USB driver of RC2001 and RC3001 does not take the certifi cation of Microsoft.
However, you can use it in your PC.
RC3001_E_Wizzit3_ENG.indd 2 RC3001_E_Wizzit3_ENG.indd 2 07.9.3 1:38:29 PM 07.9.3 1:38:29 PM