Wizz.it 3 operation – Marantz Wizz.it 3 User Manual

Page 5

WIZZ.IT 3 OPERATION

After Wizz.it 3 is installed, the Wizz.it 3 icon is displayed on the PC desktop.
Double-clicking the icon starts Wizz.it 3.
To make settings for the remote controller after startup, either edit the default confi guration fi le or use a
new confi guration fi le.

ICON DESCRIPTIONS

r t

q New Confi guration

This creates a new setting confi guration.

w Open Confi guration

This opens a setting fi le saved in the PC.

e Save Confi guration

This saves the configuration that is being
edited as a user fi le to the PC.

r Download to remote control

This writes the edited configuration to the
remote controller.

t Upload from remote control

This loads remote controller settings to the
PC.

y Undo

This is used to undo an edit operation in the
settings.

u Redo

This is used to redo an edit operation in the
settings that were undone.

i Cut

This cuts a selected setting.

o Copy

This copies a selected setting.

!0 Paste

This pastes a selected setting.

!1 Delete

This deletes a selected setting.

!2 Label

This is used to set the label of a selected
device or button.

!3 Properties

This is used to set the properties of a selected
device or button.

!4 Add new device

This adds a new device.

!5 Add new page

This adds a new page.

!6 Wizz. it Simulator

This simulates on the PC the remote controller
that was set.

!7 Clock

Sync

This synchronizes the internal clock of the
remote controller with the internal clock of the
PC.

!8 Help

The User Manual is displayed as a PDF fi le.

RC3001_E_Wizzit3_ENG.indd 3

07.9.12 8:58:56 AM