Select), Select)” (v p. 133) – Marantz AV7702 Owner Manual User Manual
Page 133
4
Select “On” in step 3 and press i to select the sound
range to be adjusted.
Bass:
Adjust bass.
Treble: Adjust treble.
5
Use o p to adjust the tone, then press ENTER.
-6 dB – +6 dB (Default : 0 dB)
0 “Tone” settings are stored for each input source.
0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0
This item cannot be set when “Dynamic EQ” is set to “On”. (v p. 181)
0 You cannot set this when no audio signal is input or in the menu “HDMI Audio Out”
is set to “TV”. (v p. 189)
0 This cannot be set when the input mode is set to “7.1CH IN”.
Displaying your desired video during
audio playback (Video Select)
This unit can display video from a different source on TV during audio
playback. You can set this for each input source.
n Supported input sources:
iPod/USB / CD
z
/ HD Radio / Online Music /
Bluetooth / Phono
z This cannot be set when any of the HDMI, component video or video
connectors are assigned.
1
Press OPTION during audio playback.
The option menu screen is displayed.
2
Use ui to select “Video Select”, then press ENTER.
3
Use o p to select the Video Select mode.
Off
(Default):
Disable Video Select mode.
On:
Enable Video Select mode.
133