Marantz AV7702 Owner Manual - Manual (Page 132)

0 Select “Reset” and press ENTER if you want to restore the adjustment values of
the various channels to “0.0 dB” (default).
0 Headphone volume can be adjusted when a headphone is connected.
0 “Channel Level Adjust” settings are stored for each input source.
0 You can only set this for speakers that output audio. In addition, you cannot set
this when in the menu “HDMI Audio Out” is set to “TV”. (v p. 189)
Adjusting the tone (Tone)
Adjusts the tonal quality of the sound.
1
Press OPTION.
The option menu screen is displayed.
2
Use ui to select “Tone”, then press ENTER.
The Tone screen is displayed.
3
Use o p to set the tone control function to on/off.
On: Allow tone adjustment (bass, treble).
Off
(Default):
Playback without tone adjustment.
Contents Connections Playback Settings Tips Appendix
132 Front panel Display Rear panel Remote Index