Interlink Electronics VersaPad PS2 - Manual (Page 6)

www.interlinkelectronics.com
4
PS2 VersaPad®
Integration Guide
4.4.5 Drag Edge Lock Use Entire Pad
If a Tap and Drag is released anywhere on the touchpad, the drag will not be
released for three seconds. This allows the drag to be resumed without requiring
another double-tap. Drag edge lock use entire pad is disabled by default on the
base design and set to edge only.
4.4.6 Right-Click in Upper Right Corner
Tapping the touchpad in its upper right corner is interpreted as a right-click. Corner
Right-Click is enabled by default on the base design.
4.4.7 Right Edge Border Scrolling
Initiating a touch on the right border edge of the touchpad will set the mouse into
scrolling mode. The finger or stylus can then be moved up and down along the
right edge to scroll. This feature does not activate when the border region is
entered during a mouse cursor movement gesture and the border region is used for
mousing only. Right edge border scrolling is enabled by default on the base
design.
4.4.8 Horizontal Scrolling
With the Interlink Electronics VersaPad driver, or a customized driver, horizontal
scrolling using the base of the VersaPad is possible.
4.4.9 Coordinate Rotation
The Interlink Electronics VersaPad driver allows the VersaPad to track the current
status of a laptop screen. When the screen is rotated, the coordinates of the
VersaPad adjust to allow for standard operation, in a modified position.
4.4.10 External Buttons
External Right, Left, and Center-Click button are available via 4-pin FFC (J3) or
Molex header connector (J7).
4.4.11 Customization
Interlink Electronics prides itself on its ability to adapt to our customers’ needs. For
appropriate opportunities a customizable list includes the following:
 Color and Texture of Graphic Layer
 Multicolor graphic artwork, text, and logos
 Orientation
 Removal of features