IDK OPF-H1000D - Manual (Page 48)

OPF-TH1000D/OPF-RH1000D User’s Guide
48
up to 8 channels
- Sampling frequency: 32 kHz to
192 kHz
- Sample size: 16 bit to 24 bit
- Reference level:-20 dBFS
- Max. input level: 0 dBFS
Connector 1 LC connector 1 female HDMI Type A (*2)
Daisy Chain
Number / Signal - 1 output / Optical signal for extension
Connector - 1 LC connector
Analog (*5)
Number / Signal 1 output / Optical signal for extension
1 output / Stereo LR unbalanced signal
- Output impedance: 75
Ω
- Reference level: -10 dBu,
- Max. output level: +10 dBu
Connector 1 LC connector 1 stereo mini jack (3.5 mm)
Plug & Play DDC2B (Built in EDID) *Max. resolution selectable using built in EDID
Fiber
optic
cable
Suitable cable Simplex fiber cable, SFP module (2 LC connectors)
Polishing (*6)
SFP for Multimode: PC (recommended)
SFP for Singlemode: UPC (recommended), SPC supported
* APC is not supported
Signal transmission distance (*7)
Multimode fiber (OM3): 985ft (approx.) <300m>
Multimode fiber (OM4): 3,280ft (approx.) <1km>
Singlemode fiber (OS1): 2.92 miles (approx.) <4.7km>
Control Serial control port
Number / Signal 1 port / simplex up to 115.2kbps
Connector 1 male 9-pin D-Sub
Others
AC adapter
Input: 100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
Output: DC 5V 3A (AC adapter supplied)
Power consumption Around 9 Watts Around 8 Watts
Dimensions
7.87(W)x1.18(H)x4.17(D) “(approx.)<200(W)x30(H)x106(D)mm>
(Quarter rack, not including projections)
Weight 0.88 lbs. (approx.)<0.6kg>
Temperature
Operating temperature: 32°F ~ 104°F<0°C ~ +40°C>
Storage temperature: -4°F ~ +176°F<-20°C ~ +80°C>
Humidity Operating/ Storage humidity: 20 % ~ 90 % (Non Condensing)
(*1) CEC, HEC and ARC are not supported.
(*2) Please use a 5 m/16.4 ft. or shorter HDMI cable.
(*3) Deep Color is not supported.
(*4) Separated analog audio input cannot be embedded onto digital video
(*5) Analog audio cannot be de-embedded (de- multiplexed) from digital audio.
(*6) Polishing methods other than the recommended one can also be used, but that may cause a change of extension distance ability due
to an increase in return loss.
(*7) The max. extension distance above was measured under the following conditions: a fiber polished by the recommended method was
used, no connection was established in the transmission path, the allowable bending radius was not exceeded.