2 setting receiver, Setting receiver – IDK OPF-H1000D User Manual
Page 24
OPF-TH1000D/OPF-RH1000D User’s Guide
24
6.4.2 Setting receiver
Setting receiver
If devices other than devices on the figure above, settings of those devices will not be affected.
1
Connect devices using cables.
2
Set DIP SW1 to “ON” (setting mode).
3
Turn on the receiver.
4
Set the receiver using commands.
5
Turn off the receiver.
6
Set DIP SW1 to “OFF” (communication mode).
RS
-232
C
FG
DC
5
V
3
A
POWER
STATUS
HDCP
HDMI OUTPUT
Rx
OPTICAL DAISYCHAIN Rx for HDMI
OPF-RH1000D
RX
OPTICAL
TX
SIGNAL
DIP SW
CLASS 1 LASER PRODUCT
クラス 1 レーザ製品
Laptop
Set DIP SW1
to “ON”.