1 setting transmitter, Setting transmitter, Connect devices using cables – IDK OPF-H1000D User Manual
Page 23: Turn on the transmitter
OPF-TH1000D/OPF-RH1000D User’s Guide
23
6.4.1 Setting transmitter
Setting transmitter
If devices other than devices on the figure above, settings of those devices will not be affected.
1
Connect devices using cables.
2
Turn on the transmitter.
3
Change the RS-232C communication mode setting from communication mode to setting
mode
.
• Set [F99] to “on” or “ALL” from the setup menu so that maintenance menu will be enabled.
• Set [C90] to “01” from the maintenance menu.
4
Set the transmitter using commands.
5
Put the RS-232C communication mode back to communication mode.
• Set [C90] to “00” from the maintenance menu.
• Set [F99] to “oFF” from the setup menu.
Laptop
Set “C90” to “01” (9600 bps)
Setting how maintenance
menu is displayed
or
RS
-232
C
FG
DC
5
V
3
A
L
AUDIO OUTPUT
R
POWER
STATUS
HDCP
HDMI INPUT
Tx
OPTICAL DAISYCHAIN Tx for HDMI
OPF-TH1000D
RX
OPTICAL
TX
CLASS 1 LASER PRODUCT
クラス 1 レーザ製品
KEY LOCK
－
＋
SET
SIGNAL