Acquiring output status – IDK OPF-H1000D User Manual

Page 44

OPF-TH1000D/OPF-RH1000D User’s Guide

@GOS

Acquiring output status

Function

Acquisition

Format

@GOS, mode

Return value

format

@GOS, mode (, status1, status2, status3, status4, status5, status6, status7)

Parameter

mode: selecting item

0 = selecting all items (information of status1 to status7)

1 to 7 = selecting items from status1 to status7

status1: Deep Color of the sink device

8bit/10bit/12bit/16bit/－

status2: HDMI and audio of the sink device

HDMI = HDMI/DVI/－

Audio = PCM/Audio Compression supported/－

status3: Color space of the sink device

RGB/YCbCr444/YCbCr422/－

status4: status of HDCP authorization with connected monitor

#0 = no HDCP

#1 to #3 = being authorized

#4 and #5 = authorization ends normally

#－ = any monitor is connected

status5: color space

RGB/YCbCr444/YCbCr422/－

status6: HDCP of the sink device

HDCP supported/HDCP not supported/－

status7: Hot plug Detect

on/off

Example

@GOS,2

@GOS,2,HDMI PCM

Acquires the output status of status2.

The output status of status2 is HDMI and PCM.