Chapter 2 system specification – IBASE FWA8308 User Manual
Page 5
4
Chapter 2 System Specification
Product Name
FWA8308
Form Factor
19
” 1U Mainstream Networking Product
Motherboard
MB968
Processor
Support for Intel® Shark Bay DT LGA1150 Haswell processors
TDP = 35W ~ 84W (DC / QC)
Chipset
Intel
®
Lynx Point C226 PCH
Package =23 mm x 22 mm , 0.65 mm ball pitch
Supported CPUs
E3-1275 v3
E3-1225 v3
E3-1268L v3
i7-4770TE
i7-4770S
i5-4570S
i5-4570TE
i3-4330
i3-4330TE
Celeron G1820TE
Celeron G1820
Pentium G3320TE
Pentium G3420
Memory
Four DDR3 UDIMM total for 32GB max memory (4Gb chip support)
Support DDR3 / DDR3L at 1.5V
Dual channel DDR3 up to 1600 MHz
Unbuffered
ECC or non-ECC
Network
Eth1: Intel® Clarkville I217LM GbE PHY , 6mm x 6mm, QFN48
with iAMT 9.0 supporting. No Bypass
Eth2~4: Intel® Pearsonville I210-AT. No Bypass.
Eth5~6: Intel® Pearsonville I210-AT. Support Bypass.
Eth7~8: Intel® Pearsonville I210-AT. Support Bypass.
Expansion Slot
Two PCI-e x8 Golden Finger
CF Card Socket
Mini PCI-e Socket (m-SATA compatible)
Storage
One internal 2.5” HDD (FWA8308 & FWA8308-RPSU)
One internal 3.5” HDD (FWA8308-2SLOT)
Front Panel
Two RJ-45 1x4 connectors for Eth1~4 & 5~6
USB 3.0 x2
RJ-45 (for console, COM1)
Three LEDs for Power, Bypass & Status
Factory Mode Restore Reset Switch
Rear Panel
PSU inlet
1x or 2x Slot (Depend on product SKU)
USB Port
Two USB 3.0 + 2.0 ports at front panel
One USB 2.0 for Mini PCI-e
Six USB 2.0 pin headers (pitch 2.54)