Lan bypass configuration, Bypass quick setting, Amt configuration – IBASE FWA8308 User Manual
Page 25

24
LAN Bypass Configuration
Aptio Setup Utility
Main
Advanced
Chipset
Boot
Security
Save & Exit
LAN Bypass Configuration
Bypass Quick Setting
[Normal]
Bypass Quick Setting
Set LAN Bypass to Normal, Bypass, Firewall or Custom Define Mode
Normal mode: All LAN ports in NORMAL. When Watchdog monitor system hangs, software will initiates a system reboot.
Bypass mode: All LAN ports in BYPASS during power-off or watchdog initiates Bypass. System will not reboot.
Firewall mode: All LAN ports in BYPASS until software change it to NORMAL under OS. When watchdog monitors system
hang, software will initiates a system reboot.
Custom Define mode: Customer defines watchdog reset, watchdog Bypass and power-off Bypass settings.
Aptio Setup Utility
Main
Advanced
Chipset
Boot
Security
Save & Exit
LAN Bypass Configuration
Bypass Quick Setting
[Custom Define]
WDT Reset Signal
WDT Bypass Setting
LAN5 LAN6 Bypass
LAN7 LAN8 Bypass
Ext LAN1 LAN2 Bypass
Ext LAN3 LAN4 Bypass
[Disabled]
[Normal]
[Normal]
[Normal]
[Normal]
System OFF Bypass Setting
LAN5 LAN6 Bypass
LAN7 LAN8 Bypass
Ext LAN1 LAN2 Bypass
Ext LAN3 LAN4 Bypass
[Normal]
[Normal]
[Normal]
[Normal]
Note:
“Ext LAN Bypass” items only appear when extended IBASE LAN module card installed.
AMT Configuration
Aptio Setup Utility
Main
Advanced
Chipset
Boot
Security
Save & Exit
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Intel AMT
[Enabled]
BIOS Hotkey Pressed
[Disabled]
MEBx Selection Screen
[Disabled]
Hide Un-Configure ME Confirmation
[Disabled]
Un-Configure ME
[Disabled]
Amt Wait Timer
0
Disable ME
ASF
Activate Remote Assistance Process
[Disabled]
[Enabled]
[Disabled]
USB Configure
[Enabled]
PET Progress
[Enabled]
AMT CIRA Timeout
0
Watchdog
[Disabled]
OS Timer
0
BIOS Timer
0
AMT Configuration
Options are Enabled and Disabled.
Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires
additional firmware in the SPI device.
Unconfigure ME
Perform AMT/ME unconfigure without password operation.
Amt Wait Timer
Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Activate Remote Assistance Process
Trigger CIRA boot.