IBASE FWA8308 - Manual (Page 30)

29
Enable NB CRID
Enable or disable NB CRID WorkAround.
Graphics Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Graphics Configuration
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
IGFX VBIOS Version 2164
IGfx Frequency
Graphics Turbo IMON
700 MHz
31
Primary Display [Auto]
Internal Graphics [Auto]
GTT Size [2MB]
Aperture Size [256MB]
DVMT Pre-Allocated [32M]
DVMT Total Gfx Mode
Gfx Low Power Mode
Graphics Performance
[256M]
[Enabled]
[Disabled]
► LCD Control
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or select SG for switchable Gfx.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by the internal graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphics memory size used by the internal graphics device.
Gfx Low Power Mode
This option is applicable for SFF only.
Primary IGFX Boot Display (LCD Control)
Select the Video Device that will be activated during POST. This has no effect if external graphics present.
Secondary booty display selection will appear based on your selection. VGA modes will be supported only on
primary display.
Memory Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Memory Information
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Memory Frequency 1600 MHz
Total Memory 32768 MB (DDR3)
DIMM#0 8192 MB (DDR3)
DIMM#1 8192 MB (DDR3)
DIMM#2 8192 MB (DDR3)
DIMM#3 8192 MB (DDR3)
CAS Latency (tCL) 11
Minimum delay time
CAS to RAS (tRCDmin) 11
Row Precharge (tRPmin) 11
Active to Precharge (tRASmin)
XMP Profile 1
XMP Profile 2
28
Not Supported
Not Supported