Dataprobe T-APS Rack - Manual

Technical Support: 201-934-5111
Main: 201-934-9944
[email protected]
Website: dataprobe.com
General Description
Dataprobe’s Model T-APS-R Automatic Protection Switch allows for protection of T1 or E1 circuits. The
Model T-APS-R can be used for protecting switch full or fractional services, as well as single ended
applications. The unit can be configured for use in Framed or unframed network protocol applications.
It is designed for use with redundant circuits and automatically switches paths in order to maintain
service. The T-APS provides both serial and Ethernet connectivity for remote access and is SNMP
compatible. Local and remote alarm notifications are provided for circuit failures.
Features
•
T1 or E1 interface selectable
•
1+1 or 1:1 automatic switching.
•
End to end or end to C.O. auto-switching capability.
•
Redundant CPE switching to single T1/E1 line.
•
Selectable alarm threshold and switching activation thresholds.
•
Configurable via RS-232 serial port or Ethernet Network.
•
SNMP Management.
•
Both active and standby line status monitoring.
•
Power fail – card service bypass circuit.
•
Alarm status and history via serial interface.
•
T1/E1 circuit failure master alarm relay output.
•
Nest expansion capability using single IP address.
•
Dual Power Inputs -48 VDC, optional 90 ~ 250 VAC.
REF: K3/T-APS-R_1150069 V3.7 V060602D.DOC
T-APS-R
T1/E1 Protection Switch
1150069
T-APS-R15 Nest Front View, shown with 15 line cards and MCU